Description: OpenSS7 Design Documentation.
This page provides a roadmap to the design information that is available on the OpenSS7 website. The design information is orgnaized by project. Some (possibly more current) design information is included with the software downloads on our downloads page.
The major design areas are as follows:
This section includes application designs for the HLR, SMSC, IN, LNP, CS/AIN, OpenSwitch, Asterisk PBX and Kannel projects.
This section presents designs for the SS7 stack components: MTP3, SCCP, TCAP, ISUP, BICC.
This section presents designs for the ISDN-related stack components: ISDN, DL, V5.2, GR-303.
This section presents designs for the SIGTRAN components: M2UA, M3UA, SUA, and TUA; and the TALI components: TALI.
This section presents designs for the VoIP stack components: H225, SIPT, and BICC over SSCOPMCE.
This section presents designs for the MG switching components: CH, MX, MG, MGCP, MEGACO H248, H245, RTP.
This section presents designs for the device drivers for the ACB56, UDP, and M2PA (over SCTP) and MTP3b (over SSCOP-MCE).
This section provides designs for transport components such as Stream Control Transmission Protoocl (SCTP), TCP, UDP and SSCOP-MCE.
This section presents designs for embedded system development for the OpenSS7 SS7 stack. These discuss using blade architectures with OpenSS7.
This section provides designs for operating system components such as the Linxu SVR 4.2 STREAMS facilities.
|Last modified: Wed, 29 Oct 2014 10:46:46 GMT |
Copyright © 2014 OpenSS7 Corporation All Rights Reserved.